Parameters

The Parameters sub menu allows you to adjust view conditions and behavior settings during the drawing process. Some parameters affect graphical views, some provide logical changes, and some affect both.

Available Parameters

Parameter	Description
Show cross-references	Shows or hides automatically created cross-references in the project
Show connection designation	Shows or hides all connection points inserted in the project
Show contactor part number above contact list	Toggles display of the contactor part number above the contact list
Show contactor type designation above contact list	Toggles display of the contactor type designation above the contact list
Potential arrow check type	Used for compatibility with older versions; currently uses the general matching method
Display cross-reference under symbol	Options: Horizontal, Vertical
Path numbering format	Sets the numbering method for paths at the top of pages: Numbered (default, used by ~95% of DIN/IEC companies), Sequential, Alphanumeric page
Contact image type	Sets the view format for contact image cross-references under contactors
Standard cable type	Sets the preset cable type displayed after a cable is inserted
Rotate connection designation 90 degrees	Shows connection designations at 90° — a standard in IEC and DIN norms
Show always page number by cross-references	Forces the page number to always be visible in cross-references, even when both symbols are on the same page

Contact Image Type Options

Option	Description
Contacts: With contacts indicated	Standard contacts with indicators
Contacts left: With contacts indicated	Contacts on left with indicators
Table: With NO/NC table	Displays a NO/NC table
Reduced: With contacts reduced in size	Compact contact display
List, JIC: Only cross-reference list with NC above line	JIC standard — NC above
List, JIC: Only cross-reference list with NC below line	JIC standard — NC below